Ap: / Unit-X / Port-Y; Ap: / Unit-X / Port-Y, Overview; Ap: / Unit-X / Port-Y, Main; Ap: / Unit-X / Port-Y, Main - General - ABB FOX61 Series User Manual

F O X C S T R E F E R E N C E
ID Fault Cause
NSW No Application Soft-
ware
UNAS Unit Not Assigned
UIC Unit Incompatible
PWRSVE Battery Power Saving
8.3

AP: / unit-x / port-y

8.3.1

AP: / unit-x / port-y, Overview

8.3.2

AP: / unit-x / port-y, Main

8.3.2.1

AP: / unit-x / port-y, Main - General

34
Table 8: AP: / unit-x, Fault Management (continued)
Event Type Traffic
Affecting
Equipment 
Alarm
Equipment 
Alarm
Equipment 
Alarm
Equipment 
Alarm
For a description of the
− "Overview - Alarms", and
− "Overview - Cross Connections"
management functions, please refer to
For a description of the
− "Main - General"
management function, please refer to
Default Description
Severity
Major There is no application ESW installed on
the unit, or the application ESW has not
yet finished its boot process.
Warning The unit is not assigned and cannot be
configured. To assign the unit, execute
the "Assign" command in the "Main"
function of the unit.
Major The inserted unit is not compatible with
the assigned unit.
Critical Power saving is active on the unit, i.e. it
is kept in the "reset" state during battery
power backup.
"1KHW002466 FOXCST
"1KHW002466 FOXCST
Operation".
Operation".

FOX61x LEDE1