Table of Contents
Advertisement
F O X C S T R E F E R E N C E
Operation Name
Parameter Name Range
Create Multiple
Start Index
Channels
Number Of Chan-
nels
n
Delete Channel ...
Delete Channel
Delete Channel
8.3.4
AP: / unit-x / port-y, Fault Management
40
Table 12:
AP: / unit-x / port-y, Configuration - Synchronization (con-
0 ... 32
1 ... 32
1 ... 32
All
chan-1 ... chan-31
For the a description of the general aspects of the
− "Fault Management - Status", and
− "Fault Management - Configuration"
management functions, please refer to
The following counter groups are available for the LEDE1 E1 ports:
•
"G.826" group, see section
ment - G.826" (page
41).
•
"P12 Events" group, see section
agement - P12 Events" (page
The following counter intervals are available, depending of the counter
group:
Table 13:
PM counter interval availability
Counter interval
User Counter
Description / Details
The start index is the channel index of the first
channel.
0 is a reserved value used for the auto-assign-
ment of a channel index: The auto-assigned
index is the highest existing index number + 1.
In the FOXCST the default value is the autoas-
signed index number.
Number of channels to be created.
If the configured number of channels to be cre-
ated is higher than the available number of
unused time slots, the FOXCST creates no
channel, and displays a corresponding error
message.
Number of consecutive timeslots. If the struc-
tured P12 signal, the channel is belonging to,
uses CAS the timeslot 16 will be skipped auto-
matically, e.g. a channel with n = 19 and start
timeslot 1 will occupy timeslots 1 to 15 and 17 to
20 in a PCM30 signal.
The default value is the maximum of available
timeslots.
The start timeslot of the first channel is the low-
est available timeslot number.
Open the FOXCST dialogue to delete one or all
channels.
Delete all channels.
All connections assigned to the channels will be
deleted also.
Delete a channel.
All connections assigned to the channel will be
deleted also.
"1KHW002466 FOXCST
"AP: / unit-x / port-y, Performance Manage-
"AP: / unit-x / port-y, Performance Man-
41).
G.826
yes
Operation".
P12 Events
yes
FOX61x
LEDE1
Hide quick links:
Advertisement
Table of Contents
