SE-1010 PC ECG User Manual
Click on Exit to return to the ECG sampling screen.
NOTE: The display modes in the Wave review window are the modes you select on the
ECG sampling screen. 3*1 and 6*1 display modes are displayed in 3*4 and 6*2
modes.
6.5.7 Stopping Sampling Data
After clicking on the Start button, there are two ways to stop sampling data.
1. The system will stop sampling ECG data and display the ECG analysis screen automatically
after the ECG sampling time is over. For details, please refer to Section 9.2.2, "Setting
Sampling Time".
2. Before the ECG sampling time is over, you can click on the Stop button to stop sampling
data and the ECG analysis screen will pop up automatically.
Figure 6-7 Wave Review Window
- 54 -
Operation Instructions for Resting ECG