EDAN SE-101 User Manual page 34

SE-1010 PC ECG User Manual Assembling SE-1010 PC ECG System
10
7
6
9
8
DX12 Receiver Exercise ECG Cable
12
11
Burglar Lock Assembly Drawing
For Resting ECG of wireless system,
1. Insert plug 1 of the patient cable into socket 2 of DX12 transmitter.
2. Insert plug 4 of the cable into socket 6 of DX12 receiver.
3. Insert plug 5 of the cable into the USB socket of the PC.
4. Connect a printer to the PC.
5. Insert the Sentinel into the USB socket of the PC.
6. Make sure that the above parts are properly connected, and then connect the PC, and the
printer to the power supply.
For Exercise ECG of wireless system,
1. Insert plug 1 of the patient cable into socket 2 of DX12 transmitter.
2. Insert DX12 transmitter into pocket 3 of DX12 belt, and then wear the belt around the waist.
3. Insert plug 8 of the cable into socket 6 of the DX12 receiver.
- 25 -