Table of Contents
Advertisement
SE-1010 PC ECG User Manual
3) When the receiver is found, the address of DX12 receiver will be displayed on the screen
in 10 seconds. Press
will be displayed on the main screen of DX12 transmitter and the Bluetooth status
indicator illuminates in kelly when DX12 transmitter and DX12 receiver are matched
successfully. The Bluetooth status indicator blinks when a data transmission builds
between DX12 transmitter and DX12 receiver. The system will return to the previous
menu if no DX12 receiver is found.
NOTE: Select the receiver address displayed in the PC ECG software when receiving
more than one addresses. For details, please refer to Section 9.3 "Device Setup".
5.7.1 Keyboard Locking/Unlocking
If no operation is taken, the keyboard will be locked automatically in 8 seconds. If the previous
screen is the menu screen, it will return to the main screen after the keyboard is locked
automatically.
When the keyboard is locked, a prompt unlock will be displayed on the left bottom of the main
screen and an icon
When the keyboard is locked, press
keyboard.
When the keyboard is unlocked, press
keyboard manually.
to start up the Bluetooth connection. The Bluetooth connection
will be displayed on the top right.
, and then press
, and then press
- 40 -
Preparations Before Operation
in 1.2 seconds to unlock the
in 1.2 seconds to lock the
Advertisement
Table of Contents
