Advertisement
FIXING THE PLATE
• Lift up the Fixing plate and fit the slots onto the
two screws previously inserted in the ceiling,
and turn until they are at the centre of the ad-
justment slot.
Warning: The plate must be facing in the direc-
tion shown in the figure
• Tighten the two screws completely and screw
in the other two provided; before locking the
screws completely it is possible to make
adjustments by turning the piece, making sure
that the screws do not come out of the
adjustment slot.
• The unit must be securely fastened both due to
the weight of the Hood and the stress caused by
occasional sideways pressure on the Appliance
when in position. Once the unit has been fixed,
make sure that the plate is stable.
• In all cases where the Ceiling is not sufficiently
strong at the point of suspension, the
Installation technician must strengthen it with
suitable plates and counterplates, anchored to
structurally sound elements.
• Check that the plate is level on the ceiling.
EN
1
10
Advertisement
