2. Troubleshooting Guide
Problem
Wireless remote
(thermo-
hygrometer) not
reporting in to
Receiver.
Solution
The maximum line of sight communication range is about 100m.
Move the sensor assembly closer to the receiver.
Install a fresh set of batteries in the remote sensor(s).
Make sure the remote sensors are not transmitting through solid
metal (acts as an RF shield), or earth barrier (down a hill).
Radio Frequency (RF) Sensors cannot transmit through metal
barriers (example, aluminum siding) or multiple, thick walls.
Move the receiver around electrical noise generating devices,
such as computers, TVs and other wireless transmitters or
receivers.
57
Need help?
Do you have a question about the IP Observer WH2600 SE and is the answer not in the manual?