Froggit IP Observer WH2600 SE Operating Instructions Manual page 34

Place the sensor array and indoor thermo-hygrometer transmitter about 1 to 3meter from the
receiver and wait several minutes for the remote sensors to synchronize with the receiver.
Once synchronized, the Indoor blue LED (Error! Reference source not found., reference 2) and
Outdoor blue LED (Error! Reference source not found., reference 3) will be illuminated.
Ref. LED
1 RF
2 Indoor
3 Outdoor
4 Server
5 ACT
6 Link
7 Power
Figure 12
On when radio frequency receiver is operating properly
On when indoor sensor received
On when outdoor sensor array received
On when connected to Wunderground.com® internet
hosting service
Flashes when there is internet activity
Connected to the Internet (or router)
AC Power connected
34
Description