Analog Devices ADXL180 iMEMS Manual page 20

ADXL180
Dual Device Synchronous Series Topology
CENTER
MODULE
The two devices are wired in a series configuration as shown in
NC NC
Figure 16. The series configuration can be configured to run in
V V V V V V V V
BP BN BN BC BP BN BN BC
either of two modes: fixed delay or autodelay. These modes are
DEVICE 1 DEVICE 2
configured using the FDLY and ADME bits in the configuration
registers.
Figure 16. Dual Device—Series Configuration
Rev. 0 | Page 20 of 56