Accessories - Hatco FLAV-R-FRESH FDWD Series Installation And Operating Manual

4" (102 MM) ADJUSTABLE LEGS
The 4" (102 mm) adjustable legs are used to add
additional height to the unit.
1. Secure all glass sides and doors with tape. Lay
the unit on it's side.
2. Remove the four 1" (25 mm) metal screw type
feet.
3. Remove leg bracket hardware, and align the new
leg bracket (part number 04.24.235.00) over
existing bracket. Secure to the cabinet with the
previously removed hardware.
Bracket
Part Number
04.24.235.00
Figure 12. Installation of Leg Bracket
4. Screw the 4" (102 mm) legs into the holes
provided. After all the legs are tightened, return
the unit to its upright position. If the unit is not
level or rocks, turn the adjustable tip of the
appropriate leg to correct the condition.
(See Figure 13.)
Figure 13. Installing and Leveling Legs
Form No. FDWDM-1207
All manuals and user guides at all-guides.com
Shorten
Lengthen
Adjustable
Tip
DISPLAY RACKS
A nickel-plated 4-tier circle rack, a nickel-plated
4-shelf multi-purpose rack, a nickel-plated 4-shelf
angle rack, and a stainless steel pretzel tree are
available to "customize" Flav-R-Fresh
foodservice operation (see Figure 14.).
4-Tier Circle Rack*
Model FDWD4TCR
3-1/4" (82 mm) opening
between racks.
Max. 15" diameter
pans.
4-Shelf Angle Rack
Model FDWD4SAR
3-3/4" (95 mm) opening
between shelves.
*Racks designed for use with motorized display.
Figure 14. Display Racks
Motorless Rack Coupling
The motorless rack coupling allows
the stationary installation of a 4-tier
circle rack or 3-tier pretzel tree in
cabinets that do not have a rack
motor (FDWD-1X and FDWD-2X).
15

ACCESSORIES

to your
®
4-Shelf
Multi-Purpose Rack
Model FDWD4SMP
3-1/2" (89 mm) opening
between shelves.
1st and 3rd shelves
are removable.
3-Tier Pretzel Tree*
Model FDWD3TPT
5-7/8" (149 mm) opening
between racks.
Motorless
Rack Coupling