Table of Contents
Advertisement
MAINTENANCE
DISPLAY LIGHT BULB REPLACEMENT
The display light is an incandescent bulb that
illuminates the warming area. This bulb has a
special coating to guard against injury and food
contamination in the event of breakage.
To replace a bulb, disconnect the power supply and
wait until the unit has cooled. Display lamps have a
threaded base. Unscrew the bulb from the unit and
replace it with a new specially coated incandescent
bulb. Hatco shatter-resistant bulbs meet NSF
standards for food holding and display areas. For
120 Volt applications, use Hatco part number
02.30.043.00. For 220 or 240 Volt applications, use
Hatco part number 02.30.058.00.
WARNING
Only light bulbs that meet or exceed NSF
standards and that are specifically designed for
food holding areas may be used. Breakage of
light bulbs not specially coated could result in
personal injury and/or food contamination.
WARNING
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966; or International
fax 414-671-3976.
All manuals and user guides at all-guides.com
12
WARNING
This product has no "user-serviceable" parts. To
avoid damage to the unit or injury to personnel,
use only Authorized Hatco Service Agents and
Genuine Hatco Replacement Parts when service
is required.
WARNING
Genuine Hatco Replacement Parts are specified
to operate safely in the environments in which
they are used. Some aftermarket or generic
replacement
parts
characteristics that will allow them to operate
safely in Hatco equipment. It is essential to use
Genuine Hatco Replacement Parts when
repairing Hatco equipment. Failure to use
Genuine Hatco Replacement Parts may subject
operators of the equipment to hazardous
electrical voltage resulting in electrical shock or
burn.
do
not
have
the
Form No. FDWDM-1207
Advertisement
Table of Contents
