Installation - Follett Ice Pro EDB1000 Installation And Service Manual

Installation

Door Entry
Some disassembly may be necessary to gain access through door
openings with a width of 850mm (34.25") to 1156mm (45.5").
Note: Disassembly is NOT necessary for gaining entry through
door openings larger than 1156mm (45.5'')
1. Remove lower splash panel with four screws (Fig. 3.1).
2. Detach the following plugs from the left side of control box:
Window interlock J26 (Fig. 4.1)
Control J21 (Fig. 4.2)
PCB power J22 (Fig. 4.3)
Auger motor J24 (Fig. 4.4)
3. Remove control panel cover by lifting and detaching hook
and loop tape (Fig. 5.1).
4. Remove lower cover with two thumbscrews, one from each
side (Fig. 5.2).
Fig. 3
1
Fig. 4
1 – Window interlock J26
3 – PCB power J22
Agitation motor J23
4 – Auger motor J24
Fig. 5
1
8
Input power
Footswitch J27
2 – Control J21
2