Welcome To Follett Corporation - Follett Ice Pro EDB1000 Installation And Service Manual

Welcome to Follett
Follett ice dispensers enjoy a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask that you take a moment
to review this manual before beginning the installation of the dispenser. Should you have any questions or require
technical help at any point, please call technical service at (610) 252-7301.
Before you begin
After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage
is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing of a claim, if
necessary.
Important Cautions
Storage area of dispenser contains mechanical, moving parts. Keep hands and arms clear of this area at all times.
If access to this area is required, power to unit must be disconnected first.
Access to service areas is restricted to persons having knowledge and practical experience of the appliance, in
particular as far as safety and hygiene are concerned.
Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
Should local codes require a hard-wired connection and/or shielded wiring, eliminate the cord(s) and plug(s) and
follow the appropriate wiring diagram.
Dispenser can accommodate most cube/cubelet ices up to 1" square or Chewblet
machines). Use of these ices can jam dispenser and void warranty. For questions about ice compatibility, call
customer service at (610) 252-7301.
Always disconnect power before cleaning or servicing the dispenser.
Failure to remove all sanitizer may result in health hazard.
ice (made by Horizon ice
®
5