Patching The Input Ports - Yamaha RIVAGE PM7 Systems Setup Manual

Patching the input ports

This section explains how to patch an input channel to the
input jack to which a microphone was connected in the
"Connecting the devices" section.
NOTE
The PATCH screen displays the input/output jacks assigned to
the TWINLANe network.
1.
Press the PATCH button on the menu bar in
the touch screen.
The PATCH screen will appear.
2.
Press the INPUT tab.
3.
Use the knob in the upper-right corner to
display the desired input jacks.
NOTE
If you press an on-screen knob that you want to control,
you will be able to operate the knob via the [TOUCH AND
TURN] knob.
If you select RY card slot 1 on the I/O rack (M1),
"M1/RY SLOT1" will appear.
4.
Use the knob in the lower left corner to
display the input channels.
40 RIVAGE PM7 System Setup Guide
5.
Press the desired grid cell to patch a desired
channel.
For this example, press the grid cell on which the
input jack (M1/RY SLOT1/1) intersects with input
channel (CH 1).