ICP DAS USA PETL Series User Manual page 23

Ethernet I/O Modules
tET-P2R2/tPET-P2R2/tET-PD2R1/tPET-PD2R1
Models
Digital Input
Input Channels
Input Type (Device)
On Voltage Level
Off Voltage Level
Input Impedance
Max. Count
Counters
Min. Pulse Width
Frequency Measurement
Overvoltage Protection
Isolation
Effective Distance
Relay Output
Output Channels
Output Type (Module)
Output Voltage Range
Max. Load Current
Operate Time
Release Time
PWM
Electrical Life
(Resistive load)
Mechanical Life
Output Isolation
Note
Because of the characteristics of the relay functions, it is recommended that the PWM on
t(P)ET-P(D)2POR2/ t(P)ET-P2R2/ t(P)ET-PD2R1/ PETL-7060 series modules (i.e., modules with relay
functions) is not used for extended periods of time.
ICP DAS CO., LTD.
tET-P2R2
tPET-P2R2
Wet Contact (Sink, Source)
+10 V ~ +50 V
DC
+4 V Max.
DC
Ω
10 k
+70 V
DC
-
2
Power Relay, Form A (SPST N.O.)
250 V /30 V
AC DC
5.0 A/channel
6 ms
3 ms
50 Hz max. (The High/Low duty cycle range = 10 ~ 65,535 ms)
5 A 250 V 30,000 ops (10 ops/minute) at 75 °C
AC
VED
5 A 30 V 70,000 ops (10 ops/minute) at 75 °C
DC
5 A 250 V 30 V
AC/
UL
3 A 250 V 30 V
AC/
20,000,000 ops. At no load (300 ops./ minute)
3000 V
rms
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 23
tET-PD2R1
tPET-PD2R1
2
Dry Contact (Source)
Close to GND
DC
Open
-
4,294,967,285 (32 bits)
0.15 ms
3.5 kHz (without filter)
-
3750 V
rms
500 M Max.
1
6,000 ops
DC
100,000 ops
DC