ICP DAS USA PETL Series User Manual page 10

Ethernet I/O Modules
More Information
All tET series modules can only be powered using a+12 V
through a removable terminal block.
In contrast, tPET and PETL-7060 series modules offer two methods of supplying power. The first is
through the Ethernet via a PoE switch; the second is through a removable terminal block via an
external power source. The external power supply should be in the range of +12 V
reason for including the second method is to provide a redundant power input feature. tPET and
PETL-7060 series modules also indicate an LED that indicates whether the power is being supplied by
the PoE switch or not.
CPU
Ethernet
Modbus TCP/UDP
Web Configuration
Web HMI
Multi-client
IP Filter
Latched DI
DI as Counter
Frequency
Measurement
I/O Pair-connection
PWM
Dual-Watchdog
ESD Protection
Surge Protection
Form Factor
Remarks
Note: tET = tPET without PoE functionality.
ICP DAS CO., LTD.
tPET PETL-7060
32-bit ARM
Simplified
Yes (Max. Connections: 5)
32-bit, 3.5 kHz
Yes (3.5 kHz Max.)
Yes (Poll/Push Mode)
Yes (100 Hz Max.)
Yes (CPU, Host)
-
Tiny Size
Cost-effective
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 10
to +48 V power supply connected
DC DC
10/100 M, PoE
Yes
Yes
Yes (Max. Connections: 12)
Yes (white list)
Yes
Yes (Poll Mode)
Yes (Module, Host)
+/- 4 kV
+/- 0.5 kV
Palm Size
to 48 V . The
DC DC
PET-7000
80186
Yes
32-bit, 500 Hz
-
-
-