Ethernet I/O Modules
Step 3 Double-click the name of the module to open the Configure Server (UDP) dialog box, and
modify the basic settings as necessary, e.g., the IP, Mask and Gateway addresses, and then click the
"OK" button to save the new settings.
Step 5 Log in to the web configuration pages for the PETL/tET/tPET module, using the default web
password, "Admin".
ICP DAS CO., LTD.
Step 4 Reset the Init/Run switch on the PETL/tET/tPET module to
the "Run" position and reboot the device.
PETL/tET/tPET DIO Series User Manual, Ver. 2.2, Aug. 2017, Page: 115