Maytag MFS80 Installation Instructions Manual page 14

Remove Shipping Brackets (cont.)
Models MFS180, MFS230, MFS275
1. Remove the rear lower panel and side panels.
2. Remove the rear shipping bracket (1), the three left-side
shipping brackets (2), and the three right-side shipping
brackets (3). Retain brackets and bolts if needed to secure
the washer for transport in the future.
3. Replace panels.
Rear View of Bracket (1)
Shipping Bracket (Models MFS180, MFS230, and MFS275)
14
Left-Side View of Brackets (3)
Shipping Brackets (Models MFS180, MFS230, and MFS275)
Right-Side View of Brackets (3)
Shipping Brackets (Models MFS180, MFS230, and MFS275)
3