FIBARO ROLLER SHUTTER 3 Operating Manual page 25

ALARM CONFIGURATION
30. Alarm configuration - 1st slot
This parameter determines to which alarm frames and how the device
should react. The parameters consist of 4 bytes, three most significant
bytes are set according to the official Z-Wave protocol specification.
Available settings: 1B [MSB] - notification Type
Default setting:
Parameter size:
31. Alarm configuration - 2nd slot (Water)
This parameter determines to which alarm frames and how the device
should react. The parameters consist of 4 bytes, three most significant
bytes are set according to the official Z-Wave protocol specification.
Available settings: 1B [MSB] - notification Type
Default setting:
Parameter size:
2B - notification Status
3B - Event/State Parameters
4B [lSB] - action:
0 - no action
1 - open blinds
2 - close blinds
[0x00, 0x00, 0x00, 0x00]
(disabled)
4 [bytes]
2B - notification Status
3B - Event/State Parameters
4B [lSB] - action:
0 - no action
1 - open blinds
2 - close blinds
[0x05, 0xFF, 0x00, 0x00]
(Water Alarm, any notification, no action)
4 [bytes]
i
NOTE
Alarm with
number has the high-
er priority, thus first
alarm will override
other alarms with the
same type.
i
NOTE
Setting notification
Value to 0xFF will re-
sult in launching the
action twice: when
alarm occurs and is
cancelled.
ADVAncED PARAMETERS
25
lower