3Com OfficeConnect 3C16710 User Manual page 68

16710.bk : MANAGING.FRM Page 32 Tuesday, October 7, 1997 11:38 AM
4-32 C 4: M Y
H A P T E R A N A G I N G O U R
Figure 4-13 Security Configuration Panel
Quick Config Manager displays the Security
Configuration panel , as shown in Figure 4-13 .
Configure the security features for each port.
3
Click on OK when the security setup is complete .
4
H U Q C M
U B S I N G U I C K O N F I G A N A G E R
In the Security Configuration panel at hub level:
Available — This lists the hub's ports, identifying
them by port number and media type. Click on
a port to select it from the list or perform a
multiple selection.
Selected — Shows the ports selected to be
configured. Click on a port to select it from the
list or perform a multiple selection.
Select> — A dds the selected ports in the
Available list to the Selected list.
<Remove — R emoves the selected ports from
the Selected list to the Available list.
All>> — Adds all the available ports to the
Selected list.
<<All — Removes all the selected ports from the
Selected list.
DUD and Need To Know are the same as for port
level, see "Configuring Security at Port Level" on
page 4-29 .