M P O R T A N T; A F E T Y; N F O R M A T I O N - 3Com OfficeConnect 3C16710 User Manual

16710.bk : IMSAFETY.FRM Page 7 Tuesday, October 7, 1997 11:38 AM
I

M P O R T A N T

WARNING: Warnings contain directions that you
must follow for your personal safety. Follow all
instructions carefully.
Please read carefully the following information
before installing the OfficeConnect® hub:
Exceptional care must be taken during installation
and removal of the unit.
Only stack the OfficeConnect hub with other
OfficeConnect units.
Only use the power adapter that is supplied with the
unit to ensure compliance with international safety
standards.
It is essential that the power outlet is located near
the unit and is accessible. You can only remove
power to the OfficeConnect hub by disconnecting
the power adapter from the unit or from the socket
outlet.
S I

A F E T Y

N F O R M A T I O N

This unit operates under SELV conditions (Safety
Extra Low Voltage) according to IEC 950, the
conditions of which are maintained only if the
equipment to which it is connected is also
operational under SELV.
There are no user-replaceable fuses or
user-serviceable parts inside the hub. If you have a
physical problem with the unit that cannot be solved
with problem solving actions in this guide, contact
your supplier.
Disconnect the power adapter before moving the
unit.
WARNING: Twisted Pair RJ45 ports. These are
shielded RJ45 data sockets. They cannot be used as
telephone sockets. Only connect RJ45 data
connectors to these sockets.