3Com OfficeConnect 3C16710 User Manual page 103

16710.bk : PROBSOLV.FRM Page 5 Tuesday, October 7, 1997 11:38 AM
Problems When Using an IP/IPX- ba sed Ma nagement Ap plication 6-5
The IP/IPX-based management application can no
longer access the device. Check that
Community-SNMP access is enabled, see
"Configuring Local Security" on page 5-15 .
Check that the port through which you are trying to
access the hub has not been disabled. If it is enabled,
check the connections and network cabling at the
port. Try accessing the hub through a different port.
If you can now access the hub, a problem with the
original port is indicated. Re-examine the
connections and cabling.
Possibly there is a network problem preventing you
from accessing the hub over the network. Try
accessing the hub through the console port, and
reset the hub.