Lists And User Lists - ARRI ALEXA Series User Manual

68

11.1.3.1 Lists and User Lists

Temperature
Warning
Temperature Error
Lock
SD Card
Grab
High Humidity
Mode
Radio
Note: A sensor temperature warning or error after boot-up is normal as the
sensor takes a few seconds to reach its preset temperature.
On the HOME screen, press the FPS, SHUTTER,
EI
and (exposure index) buttons to open lists of preconfigured values
for each setting.
User-defined values can be added to the FPS, SHUTTER and WB lists.
The EI list is fixed and user-defined values cannot be added. It contains
values from 160-3200 ASA in steps of 1/3 stops.
Setting a list value
Figure 42: SENSOR FPS screen
Any value in a list may be set. Invalid values will appear grayed out.
To set a list value:
There is a minor sensor-temperature offset.
Image quality may be slightly affected.
There is a substantial sensor-temperature
offset. Image quality may be seriously affected.
The Main Controls are locked.
An SD card is present. The icon turns orange
when the card is accessed.
The GRAB icon flashes while a still frame is
being taken and written to the SD card.
The sensor is in High Humidity mode (i.e. the
sensor is kept at 40° C sensor temperature to
avoid condensation).
The ARRI Wireless Remote System (WRS) radio
is active.
WB
(white balance)
Camera Controls