Monitoring - ARRI ALEXA Series User Manual

Main Controls

11.1.5.2 Monitoring

Select the Monitoring submenu to adjust parameters for monitoring on
the EVF-1 and over the MON OUT output. These outputs are meant for
monitoring and not recording.
Frame lines set in the Frame lines submenu apply to both MON OUT
and EVF-1. Select the Electronic viewfinder and MON OUT submenus to
switch the set frame lines on or off individually.
Electronic Select to adjust EVF-1 settings.
viewfinder
MON OUT Select to adjust MON OUT settings.
Frame lines Select to set up frame lines.
RET IN path Select to set which of the monitoring output paths
carries the signal at the RET IN connector as
Return in active is toggled via a
Electronic Select to adjust the sensitivity of the electronic
horizon horizon.
sensitivity
Note: Available on ALEXA Plus, ALEXA Plus 4:3,
ALEXA Studio , ALEXA M, ALEXA XT Plus, ALEXA
XT M, ALEXA XT Studio and ALEXA HD Plus only
False color Select to open the FALSE COLOR INDEX screen
index
which has a reference chart explaining the false
color coding for EVF and MON OUT.
Electronic Viewfinder
USER
button.
111