Sd Card - ARRI ALEXA Series User Manual

SD Card

9.13 SD Card
The ALEXA saves data such as user setups, frame grabs and system
logs to an SD card. Firmware, additional frame lines and ARRI Look
Files are loaded onto the camera from the SD card. The SD card slot is
located on the bottom of the camera on the camera-right side. To
access the SD card slot, slide the door towards the front of the camera.
SD Card Requirements
SD or SDHC card (most brands are compatible)
maximum capacity of 4GB
FAT or FAT32 format
Note: Keep the SD card slot door closed to prevent dirt and moisture from
entering the camera.
The SD card can be formatted on the ALEXA or the following folder
structure can be created manually on a computer. The SD card must be
properly formatted prior to its first use.
Figure 35: Folder structure required for SD card
To format an SD card on the ALEXA:
MENU
1. Press the button.
2. Using the jogwheel, select System.
3. Select SD Card.
4. Select Format + prepare SD card.
FORMAT
5. Press both
the required folder structure on the SD card after formatting.
Note: Formatting the SD card will irreversibly remove all data on the SD card.
buttons simultaneously. The ALEXA will create
53