Function Buttons - ARRI ALEXA Series User Manual

Main Controls

11.1.4 Function Buttons

Note: If the gray card is significantly over- or underexposed, the ALEXA
may not be able to calculate a white balance value and will display an
error message.
To rename a white balance:
1. On the HOME screen, press the
2. Using the jogwheel, select the name of the white balance you wish
to rename.
RENAME
3. Press the
4. Use the jogwheel to enter a new name.
DONE
5. Press the button to save the new name.
Figure 59: WB SET NAME screen
Note: Default white balance values cannot be renamed.
The main controls feature the following function buttons:
ON/OFF
Press once to switch the camera on. Press and
hold for 5 seconds to switch off the camera. A
countdown will be displayed on the HOME
screen. If the button is released before the
countdown has elapsed, the camera does not
switch off.
WB
button.
button.
87