Led Status - KDS Flymentor 3D User Manual

1.4 LED status

There are two LEDs on Flymentor 3D to indicate the working status of Flymentor 3D.
LED shine map
Red and
Green shine
Green shine
*Attention: please refer to section 4.2.1 for detail of working mode
Flymentor 3D status
No signal from
Red fast
receiver
blink
F l y m e n t o r 3 D
Red slow
initializing failed
blink
Under manual
Red shine
control
Balancing
mode on
Positioning
mode on
Positioning
Green blink
mode failed
KDS Flymentor 3D User Manual
Helicopter may be moved when Flymentor 3 D
was on, please re- start the Flymentor 3 D
Manual control, Flymentor 3D does not work
Under horizontal mode, no anti-drifting
Under positioning mode, balancing function and
anti-drifting function
CCD can not obtain enough contrast, can not
switch to positioning mode, the Flymentor 3D
only works under balancing mode.
5
Comment