Flight Testing Stage; Adjusting 'Gyro Parameters - KDS Flymentor 3D User Manual

4.Flight Testing Stage

Normally, the default settings can be used for flight. But if you want better effect, you should
adjust the 'Flying parameters'. This chapter will tell you how to adjust these parameters.

4.1 Adjusting 'Gyro parameters'

There is a gyro in Flymentor 3D, this page is used to configure the gyro. You may use the default
setting for mostly flying, but for advanced user, it is necessary to make some adjusting to
achieve better performance.
KDS Flymentor 3D User Manual
Diagram 4.1.1 Gyro page
21