Faq - KDS Flymentor 3D User Manual

When this happens, it is recommended that you use this function to restore Flymentor 3D to
factory settings. Then do some changes on the base of factory settings.
Click 'Reset' button, settings on screen will restore to factory default value, then click 'Write'
button, settings will be saved into Flymentor 3D after progress bar shows finished.
* Attention: if ' Write' function did not be executed, the factory setting would not be save
into Flymentor 3 D.

7. FAQ

Q: Serv os have no action
A: Refer to section 1.4, make sure the Flymentor 3D is working properly.
Modify flag
Diagram 6.1 Reset to factory settings
KDS Flymentor 3D User Manual
'Reset' button
'Write' button
30