Adjustment And Saving - KDS Flymentor 3D User Manual

2.2 Adjustment and Saving

Normally, you should read parameters from Flymentor 3D before adjusting, then change and
save it. After Flymentor 3D was connected, click 'Read' button, see diagram2.2.1.
After reading, you will see configure page on the right side of the software, like diagram2.2.2.
You can use mouse to drag them for fast adjusting, or use keyboard ( left or right) for
precise adjusting.
Switch
KDS Flymentor 3D User Manual
Diagram 2.2.1 Read parameters
Diagram2.2.2 Sample configure page
'Read' button
10
Parameter bar