Adjusting ' Servos Parameters - KDS Flymentor 3D User Manual

arrows.
2) Main rotor direction
You can look into your rotor, record the rotate direction ( clockwise or counter
clockwise) , and set this parameter.
3) Swashplate type
Select your swashplate type here.
* Attention: Please refer to chapter 2 for computer connection and parameters adjustment.

3.4 Adjusting ' Servos parameters'

The page is used for setting servo reverse and neutral. See diagram3.4.1. The parameter
about servo4 , will be set only under four servo swashplate mode.
KDS Flymentor 3D User Manual
Abbildung 3.4.1 'Servo'-Einstellungen
16
* Attention:
to avoid injury,
please unmount
main rotor and shut
off power!