Settings Per Port (Table) - Hirschmann RS20 Reference Manual

Switching
Parameter Meaning
Send to query and The device sends the packets with a
registered ports known MAC/IP Multicast address to all
query ports and to registered ports.
This standard setting sends all Multi-
casts to all query ports and to regis-
tered ports. The advantage of this is
that it works in most applications with-
out any additional configuration.
Application:
"Flood and Prune" routing in PIM-DM.
Send to registered The device sends the packets with a
ports known MAC/IP Multicast address to
registered ports. The advantage of this
setting, which deviates from the stan-
dard, is that it uses the available band-
width optimally through direct
distribution. It requires additional port
settings.
Application:
Routing protocol PIM-SM.
Table 32: Known Multicasts

4.4.5 Settings per port (table)

With this configuration table you can enter port-related IGMP or GMRP
settings.
80
4.4 Multicasts
Value range Default setting
selected/dese- deselected
lected
selected/dese- selected
lected
Release 5.0 04/09
RM Web L2E