Restart - Hirschmann RS20 Reference Manual

Basic Settings

1.7 Restart

With this dialog you can:
Cold start the device. In a cold start, the device reloads the software from
the non-volatile memory, restarts, and performs a self-test.
Warm start the device. In this case the device checks the software in the
volatile memory and restarts.
Reset the entries with the status "learned" in the filter table (MAC address
table),
Reset the ARP table (the device maintains an ARP table internally. If, for
example, you assign a new IP address to a computer and subsequently
have problems with the connection, you then reset the ARP table).
Reset the port counters,
Delete the log file.
Note: During the restart, the device temporarily does not transfer any data,
and it cannot be accessed via the Web-based interface or other management
systems such as HiVision.
RM Web L3P+
Release 5.0 04/09
1.7 Restart
35