Restart - Hirschmann MACH 4000 Reference Manual

Basic Settings

1.7 Restart

With this dialog you can:
initiate a cold start of the device. The device reloads the software from the
non-volatile memory, restarts, and performs a self-test.
In your browser, click on "Reload" so that you can access the device again
after it is booted.
initiate a warm start of the device. In this case the device checks the
software in the volatile memory and restarts. If a warm start is not
possible, a cold start is automatically performed.
reset the entries with the status "learned" in the filter table (MAC address
table).
reset the ARP table.
The device maintains an ARP table internally.
If, for example, you assign a new IP address to a computer and
subsequently have problems setting up a connection to the device, you
then reset the ARP table.
reset the port counters.
delete the log file.
Note: During the restart, the device temporarily does not transfer any data,
and it cannot be accessed via the Web-based interface or other management
systems such as HiVision.
RM Web L3E
Release 6.0 07/2010
1.7 Restart
39