Restart - Hirschmann RS20 Reference Manual

Industrial ethernet switch web-based interface

Hide thumbs Also See for RS20:

Table of Contents

Basic Settings

2.6 Restart

With this dialog you can:

Cold start the device. In a cold start, the device reloads the software from

the non-volatile memory, restarts, and performs a self-test.

Warm start the device. In this case the device checks the software in the

volatile memory and restarts.

Reset the entries with the status "learned" in the filter table (MAC address

table),

Reset the ARP table (the device maintains an ARP table internally. If, for

example, you assign a new IP address to a computer and subsequently

have problems with the connection, you then reset the ARP table).

Reset the port counters,

Delete the log file.

Note: During the restart, the device temporarily does not transfer any data,

and it cannot be accessed via the Web-based interface or other management

systems such as HiVision.

RM Web L2B

Release 4.2 07/08

2.6 Restart

Table of Contents