Spray Arms; Hose Filter - Westinghouse WSF6606 User Manual

MAINTENANCE AND CLEANING

Spray arms

Check whether the holes for the upper and lower spray
arms are clogged . If there is any clogging, remove the
spray arms and clean them under water .
You can remove the lower spray arm by pulling it
upwards, while the upper spray arm can be removed by
turning the lock nut to the left . Be sure that the nut is
perfectly tightened when refitting the upper spray arm .

Hose filter

The inlet hose filter reduces contamination (sand, clay,
rust etc .) that might be occasionally carried in through
the main's water supply or the indoor plumbing, and
avoids damage to dishwasher components . Check the
filter and the hose from time to time and clean them if
necessary . To clean the filter, first turn off your tap and
then remove the hose . After removing the filter from the
hose, clean it under the tap . Insert the cleaned filter back
into its place inside the hose . Refit the hose and check
that there are no leaks .
22
MAINTENANCE AND CLEANING