Introduction; Minimum System Requirements - Aztech na8300 Easy Start

Thank you on your purchase of the Wireless Broadband 4-Port Router! The Wireless 4-
Port Router allows you to share high-speed broadband connection with multiple PC using
a single device wired or wireless.
The Wireless Broadband 4-Port Router can be connected to any computer/notebook with
a 10/100 Base-T Ethernet card for wired connection or a IEEE 802.11g Wireless adapter.
The Ethernet port have Auto MDI/MDIX feature which allows both cross or straight UTP
cable to be utilized. The Wireless 4-port Ethernet Router has an in-built IEEE802.11g
Wireless LAN Access Point for wireless connectivity.
This documentation assumes that you have already installed an Ethernet card or wireless
adapter on your computer/notebook.

Minimum System Requirements

• Pentium MMX 233MHz
®
• Ethernet card installed with TCP/IP Protocol (Required only if you are connecting to
the ETHERNET port of your Router)
• IEEE 802.11g Wireless adapter
Point of the router)
• OS independent for Ethernet
• Web Browser support:
Microsoft Internet Explorer 4.0 (or later versions)
Netscape® Navigator 3.02 (or later versions)
CABLE/DSL Wireless Router Package
For any missing items, please contact your dealer immediately.
CABLE/DSL
Wireless Router

Introduction

(Required if you are connecting to the Wireless Access
Power adapter (DC 9V)
Easy Start
Ethernet Network cable (RJ-45)
Easy Start Easy Start Easy Start Easy Start Easy Start
CAT-5 UTP Straight
(Qty:2)
3