Introduction; Minimum System Requirements; Adsl Router Package - Aztech DSL600EWR Easy Start

Thank you on your purchase of the ADSL Wireless LAN 4-Port Ethernet Router! The Wireless
4-Port Router allows you to share high-speed broadband connection with multiple PC using a
single device wired or wireless.
The Wireless Broadband 4-Port Router can be connected to any computer/notebook with a
10/100 Base-T Ethernet card for wired connection or an IEEE 802.11g Wireless adapter. The
Ethernet ports have Auto MDI/MDIX feature which can allows both cross or straight UTP
cable to be utilized. The Wireless 4-port Ethernet Router has an in-built IEEE802.11g
Wireless LAN Access Point for wireless connectivity.
This documentation assumes that you have already installed an Ethernet card or a wireless
adapter on your computer/notebook

Minimum System Requirements

Pentium ® MMX 233MHz
•
•
Ethernet card installed with TCP/IP Protocol (Required only if you are connecting to
the ETHERNET port of your ADSL Router)
•
IEEE 802.11b Wireless adapter (Required if you are connecting to the Wireless
Access Point of the router)
•
OS independent for Ethernet
•
Web Browser support:
Microsoft Internet Explorer 4.0 (or later versions)
Netscape® Navigator 3.02 (or later versions)
For any missing items, please contact your dealer immediately.
ADSL Ethernet Wireless Router
Power adapter (DC 12V)
POTS-Splitter 1 (optional)
1 Depending on your country of purchase, your package may or may not come with a
POTS Splitter. The POTS Splitter is required if you are connecting a Telephone Set to the
Ethernet Modem. Please refer to Step 1.2 - Connecting to the ADSL Line for details.
POTS-Splitter can also be purchased from your dealer.
Easy Start

Introduction

ADSL Router Package

Easy Start
CAT-5 UTP Straight Ethernet Network cable (RJ-45)
3 of 13
Telephone extension cable