Aztech na8300 Easy Start page 5

Back Indicators
POWER SWITCH
To power on or off the modem.
I - indicates ON position
O - indicates OFF position.
DC IN
To connect to the Power Adapter that comes with your package.
RESET
To reset your CABLE/DSL Wireless Router to factory default settings.(All customised
settings that you have saved will be lost!)Please refer to the below footer
activate the reset function.
ETHERNET
10/100 Base-T Ethernet jack (RJ-45) to connect to your Ethernet Network card or
Ethernet Hub / Switch
Modem
To connect to the CABLE/DSL modem.
RF Antenna
0
180 2.4Ghz Wireless Antenna.
2 To activate the reset function:
- Ensure that your CABLE/DSL Router is powered on.
- Use a paper clip or a pencil tip to depress the reset button and release. At this point, the
WAN indicator light will go off, followed by the ETHERNET indicators. The reset is in
progress.
- When the WAN indicator light up or blinking, it means that the reset process is completed.
The default settings are now restored.
Easy Start Easy Start Easy Start Easy Start Easy Start
on how to
2
5