AVM FRITZ!Box 7530 Configuration And Operation page 45

Connecting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Encryption
WPA encryption with WPA2 mode is preconfigured in the FRITZ!Box.
WPA2 mode is more secure than the older WPA mode.
The more up-to-date the encryption mode, the more secure the wire­
less connection:
Encryption
WPA
non-encrypted
The encryption method and mode must be supported by the network
devices. Set the encryption mode in the FRITZ!Box according to the
following table:
Mode
WPA2
WPA + WPA2
Network devices that do not support WPA can establish only non-
encrypted wireless connections to the FRITZ!Box. You should avoid
using such devices if at all possible.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Box 7530
Mode Protocol
WPA2 CCMP
WPA TKIP
– –
Use
This mode is preconfigured in the FRITZ!Box. This
mode is suitable if you use only network devices
that support WPA2. Most up-to-date wireless
devices support this mode.
Set this mode if you would also like to use older
network devices that do not support WPA2. With
this setting, the FRITZ!Box automatically uses the
WPA mode most suitable for your connections.
45
Security
Very secure
Secure
Very insecure, not
recommended