SMC Networks TIGERSWITCH 10/100 Management Manual page 95

Web – Click VLAN, VLAN Static Table. Select a VLAN ID from the
scroll-down list. Modify the VLAN name and status if required.
Select the membership type by marking the appropriate radio
button in the list of ports or trunks. Click Apply.
CLI – This example adds the required interfaces.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport allowed vlan add 2 tagged
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#switchport allowed vlan add 2 untagged
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#switchport forbidden vlan add 2
VLAN C
ONFIGURATION
3-89
3-129
3-130
2-63