SMC Networks TIGERSWITCH 10/100 Management Manual page 53

Web – Click System, Firmware. Enter the IP address of the TFTP
server, enter the file name of the software to download, enter the
Destination File Name to overwrite the current file on the switch
then click Transfer from Server. To start the new firmware,
reboot the system via the Reset menu.
CLI – Enter the IP address of the TFTP server, select "config" or
"opcode" file type, then enter the source and destination file
names, set the new file to start up the system, and then restart the
switch.
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: ACD_v1.0.0.8.bix
Destination file name: acd
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#config
Console(config)#boot system opcode: acd
Console(config)#exit
Console#reload
M F
ANAGING IRMWARE
3-20
3-25
3-17
2-21