SMC Networks TIGERSWITCH 10/100 Management Manual page 153

Command Description
Group
RADIUS Client Configures RADIUS client-server authentication for
logon access
Port Configures IEEE 802.1x port access control
Authentication
SNMP Activates authentication failure traps; configures
community access strings, and trap managers
IGMP Configures IGMP multicast filtering, querier
Snooping eligibility, query parameters, and specifies ports
attached to a multicast router
Line Sets communication parameters for the serial port
and Telnet, including baud rate and console
time-out
IP Configures the IP address and gateway for
management access, displays the default gateway,
or pings a specified device
HOL Blocking Enables head-of-line (HOL) Blocking Prevention
Prevention on the switch
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs
Rate Limiting Sets the maximum rate for traffic transmitted or
received on an interface
Address Table Configures the address table for filtering specified
addresses, displaying current entries, clearing the
table, or setting the aging time
Spanning Tree Configures Spanning Tree settings for the switch
VLAN Configures VLAN settings, defines port
membership for VLAN groups
PVLAN Enables or configures private VLANs
GVRP and Configures GVRP settings that permit automatic
Bridge Extensi VLAN learning; shows the configuration for bridge
on extension MIB
Priority Sets port priority for untagged frames, also sets the
service weight for each priority queue based on
strict priority or Weighted Round Robin
C G
OMMAND ROUPS
Page
3-38
3-44
3-54
3-61
3-68
3-79
3-86
3-88
3-104
3-106
3-111
3-121
3-132
3-140
3-146
3-11