Displaying Switch Hardware/Software Versions - SMC Networks TIGERSWITCH 10/100 Management Manual

C
ONFIGURING THE
Displaying Switch Hardware/Software
Versions
Use the Switch Information page to display hardware/firmware
version numbers for the main board and management software, as
well as the power status of the system.
Command Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports and
expansion ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal
power supply.
Management Software
• Loader Version – Version number of loader code.
• Boot-ROM Version – Version number of Power-On Self-Test
(POST) and boot code.
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master (i.e.,
operating stand-alone).
Expansion Slots
• Expansion Slot – Indicates any installed module type.
2-28
S
WITCH