SMC Networks TIGERSWITCH 10/100 Management Manual page 275

Command
switchport
private-vlan
host-association
switchport
private-vlan
mapping
Display Private VLAN Information
show vlan
private-vlan
To configure private VLANs, follow these steps:
1. Use the private-vlan command to designate one or more
community VLANs and the primary VLAN that will channel
traffic outside the community groups.
2. Use the private-vlan association command to map the
secondary (i.e., community) VLAN(s) to the primary VLAN.
3. Use the switchport mode private-vlan command to
configure ports as promiscuous (i.e., having access to all ports
in the primary VLAN) or host (i.e., having access restricted to
community VLAN members, and channeling all other traffic
through a promiscuous port).
4. Use the switchport private-vlan host-association command
to assign a port to a secondary VLAN.
5. Use the switchport private-vlan mapping command to
assign a port to a primary VLAN.
6. Use the show vlan private-vlan command to verify your
configuration settings.
Function
Associates an interface with a
secondary VLAN
Maps an interface to a primary VLAN
Shows private VLAN information
P VLAN C
RIVATE
Mode Page
IC
IC
NE,
PE
OMMANDS
3-137
3-138
3-139
3-133