SMC Networks TIGERSWITCH 10/100 Management Manual page 130

C
ONFIGURING THE
CLI – This example shows statistics for port 1.
Console#show interfaces counters ethernet 1/13
Ethernet 1/ 1
Iftable stats:
Octets input: 163138, Octets output: 2056071
Unicast input: 1564, Unicast output: 1918
Discard input: 0, Discard output: 0
Error input: 0, Error output: 0
Unknown protos input: 0, QLen output: 0
Extended iftable stats:
Multi-cast input: 0, Multi-cast output: 1118
Broadcast input: 18, Broadcast output: 2
Ether-like stats:
Alignment errors: 0, FCS errors: 0
Single Collision frames: 0, Multiple collision frames: 0
SQE Test errors: 0, Deferred transmissions: 0
Late collisions: 0, Excessive collisions: 0
Internal mac transmit errors: 0, Internal mac receive errors: 0
Frame too longs: 0, Carrier sense errors: 0
Symbol errors: 0
RMON stats:
Drop events: 0, Octets: 163138, Packets: 1582
Broadcast pkts: 18, Multi-cast pkts: 0
Undersize pkts: 0, Oversize pkts: 0
Fragments: 0, Jabbers: 0
CRC align errors: 0, Collisions: 0
Packet size <= 64 octets: 1249, Packet size 65 to 127 octets: 170
Packet size 128 to 255 octets: 6, Packet size 256 to 511 octets: 151
Packet size 512 to 1023 octets: 6, Packet size 1024 to 1518 octets: 0
Console#
Rate Limit Configuration
This function allows the network manager to control the maximum
rate for traffic transmitted or received on an interface. Rate limiting
is configured on interfaces at the edge of a network to limit traffic
into or out of the network. Traffic that falls within the rate limit is
transmitted, while packets that exceed the acceptable amount of
traffic are dropped.
2-98
S
WITCH
3-100