SMC Networks TIGERSWITCH 10/100 Management Manual page 127

Web – Click IGMP, IGMP Member Port Table. Specify the interface
attached to a multicast service (via an IGMP-enabled switch or
multicast router), indicate the VLAN that will propagate the
multicast service, specify the multicast IP address, and then click
Add. After you have completed adding ports to the member list,
click Apply.
CLI – This example assigns a multicast address to VLAN 1, and
then displays all the known multicast services supported on
VLAN 1.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12
ethernet 1/12
Console(config)#exit
Console#show mac-address-table multicast vlan 1
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1 224.0.0.12
1 224.1.2.3
Console#
Eth1/12 USER
Eth1/12 IGMP
M C
ULTICAST ONFIGURATION
3-156
3-158
2-95