JTECH GuestCall IQ User Manual page 6

5. After setting the duty alert function, press, "enter". Display will show "Duty _ _ saved".
6. Press the "# /Select" to go the second pager or "CANCEL" twice to exit the system- programming menu.
Follow the procedure above to program the next pager.
Set the "Out of Range" Alert
With this feature enabled, the pagers will play a melody (IQ Pager) or vibrate (LTD Pager) when taken out of range of
the transmitter to inform the guest that they are too far away and will miss their page. The melody or vibration will
automatically stop when they step back within range. Be sure that all pagers are returned before turning out of range
on or off. The factory default is OFF.
To turn the out of range "ON":
1. At the "Out of Range" menu, press the "# /Select" key to turn the out of range ON.
2. Press the "Enter" key 2 times. Pagers will turn off and turn back on automatically when the out of range is
being programmed. After programming, the pagers will be activated when the pager is taken out of range of
the transmitter.
3. Press "CANCEL" key 3 times to exit the programming menu.
To turn the out of range "OFF":
1. At the "Out of Range" menu, press "# /Select" key to turn the out of range OFF.
2. Press the "Enter" key 2 times. Pagers will turn off and turn back on automatically when the out of range is
being programmed.
3. Press "CANCEL" key twice to exit the system-programming menu.
800.321.6221
User Manual
IQ All in One
Model Number: IQAIO
6