Quick Setup; System Use - JTECH GuestCall CommPass J1701 User Manual

Components
Your GuestCall ® CommPass paging system:
> IQ Base / ISTATION Transmitter
> The CommPass Pagers
The CommPass Charger
>

Quick Setup

Lock the antenna to the connector on the transmitter by placing the antenna on the connector and twisting
>
left to lock in place.
Plug the power supply into the transmitter and then into a standard 110-240v outlet. A surge protector is
>
recommended.
Compile charger bases and plug charger power supply into charger and then into a standard outlet. Surge
>
protection is recommended for charging bases.
Add pagers to charger slots. You will see a BLUE light on each pager. This light indicates the charging status.
>
o 'LO' on the number display: Battery is below 20% charged and SHOULD NOT currently be used.
Flashing BLUE: Pager is charging and CAN BE available for use.
o
o Solid BLUE: Pager is fully charged.
o Allow 4 hours for a complete charge of the pagers.

System Use

800.321.6221
User Manual
GuestCall Paging, CommPass Pagers
Model Number: J1701, J1702
2