Advertisement
PK-88 OPERATING MANUA].
DFROM all,none,yes/no calll[,ca112..] Mnemonic: DF Default: all
Parameters:
call
-
all, none, YES list, NO list.
list of up to eight call signs, separated by commas.
DFROM uses arguments to determine how the PK-88 responds to stations trying to use
your station as a digipeater - which stations will be repeated and which stations will
not be repeated. DFROM is set to 'all' when you start the PK-88 for the first time.
DFROM ALL/NONE is synonymous with the DIGIPEAT ON|OFF command used in older packet
controllers and can be used interchangeably as required.
Type DFROM to display the ALL/NONE/YES_list/NO_list status of station call signs whose
packets will or will not be repeated. You can use the abbreviated command form or
mnemonic:
cmd:dfrom
DFROM
cmd:df
DFROM
To prevent all stations from using your station as a digipeater, type DFROM NONE.
To permit one or more specific stations to digipeat through your station, type DFROM
(YES followed by a list of calls signs). Packets will be digipeated only from and to
stations whose call signs are listed.
To prevent one or more specific stations from digipeating through your station, type
DFROM (NO followed by a list of call signs). Packets will not be digipeated only from
and to stations whose call signs are listed.
You can include optional SSIDs or extensions specified as '-n' after the call sign.
If DFROM is set to 'no WX1AAA' or 'yes WX1AAA', combinations WX1AAA' WX1AAA-1 ....
WX1AAA-15 will be matched and processed.
If DFROM is set to 'yes WX1AAA-1' or 'no WX1AAA-1,' then only WX1AAA-1 will match and
be processed.
Clear DFROM with '%,' '&,' or 'OFF' as arguments.
5-40
all
yes WX1AAA,WX2BBB,WX3CCC,WX4DDD
5-40
COMMAND SUMMARY
PK88-122
Advertisement
